Micro Powder Grinder

Posted on Posted in product
Micro Powder Grinder
Micro Powder Grinder

Micro Powder Grinder

Processing ability: 0.2-45t/h
Max feeding size: 25mm
Product Fineness: 325-3000Mesh
Range of application: Barite, quartz, feldspar, mica, calcite, talc, apatite, gypsum, fluorite, limestone, dolomite, diatomite, ceramic soil, clay, marble, granite, fly ash, kaolin, calcium carbonate, slag, bauxite, glass, etc.

Overview

The Handling Materials of Micro Powder Grinder

Micro Powder Grinder is a device that breaks solid materials into powder by grinding, Such comminution is an important unit operation in many processes. It is usually used in Metallurgy, building materials, chemical and mine industries.

Micro Powder Grinder is suitable for the super fine grinding of all kinds of crisp materials whose Moh’s hardness is below 7, such as calcium carbonate, barite, dolomite, calcite, limestone, kaolin, bentonite, marble, gypsum, quartz, feldspar, clay, talc, fluorite, white mud, mica, refractory material, glass, total about 1000 kinds of materials.

Micro Powder Grinder width=

Internal structure and Working Principle of Micro Powder Grinder

Micro Powder Grinder is mainly formed by mill body, blower fan, ultra-fine analyzer, finished product cyclone container, bag de-duster and air pipe. The elevator, storage bin, electric control cabinet, powder feeder and crusher are optional for the demands of customers.

Micro Powder Grinding Mill

When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.

Micro Powder Grinder

Benefit

Advantages of Micro Powder Grinder

1.The yield is 40% higher than other mills.

2.High utilization rate of Wear material:2-5years.

3.Adjustable particle size:325-3000mesh.

4.High safety and reliability. The design of the mill is rigorous, so no screw loosening to damage the machine.

5.Closed system, so it is the green and ideal equipment for environment protection.

Specifications

Model HGM80 HGM90 HGM100 HGM125 HGM168L
Ring Diameter(mm) 800 900 1000 1250 1680
Ring Number (PCS) 3 3-4 4 4      4
Roller Number(PCS) 18-21 24-29 28-36 30-44 30-40
Main Shaft Speed (r. p. min) 230-240  200-220 180-200 135-155 120-130
Input Size (mm) ≤10 ≤10 ≤15 ≤15 ≤20
Finished Size (um/mesh) 74-5

(200-2500)

74-5

(200-2500)

74-5

(200-2500)

100-6

(150-2000)

100-9

(150-1500)

Capacity (t/h) 0.4-4.5 0.6-6.5 1-9 2-16 3.8-30
Outlet Size L*W*H (m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 14*9*10.25 26.3*7.5*11.9

Unit: KW HGM80 HGM90 HGM100 HGM125 HGM168L
Main Unit 55-75 2*45 132 185-200 315
Classifier 18.5 18.5 30 37-4*15   5*18.5
Blower 45 55 75 2*45-2*55 2*75-2*90
Crusher 18.5 18.5 18.5 45 75
Bucket Elevator 3 3 4 4 7.5
BeltConveyor Feeder 2.2 2.2 2.2 3 3
Spiral Conveyor 3 3 3-4 2*3 2*5.5
Discharging Valve 2*0.75 1*0.75  1*1.1 2*1.1 2*1.1 2*0.75-2*1.5
Air compressor 11 15 22 2*15-37 55

Leave a Reply

Your email address will not be published. Required fields are marked *